Table of Contents
Advertisement
4
Set the ring time and action when receiving a fax, and press [Apply].
Set this when [Fax/Tel (Auto Switch)] is selected for RX mode. If you selected another RX mode, this step is not
required.
[Ring Start Time]
Specify the time to determine whether an incoming call is a fax or a phone call. The machine does not ring at
this time.
Reception starts when the machine determines that the call is a fax.
[Incoming Ring Time]
Specify the ring time for incoming calls when it is determined that the call is not a fax.
[Action After Ring]
Select the action to take when the handset is not picked up while ringing.
Select [End] to disconnect the call, or select [Receive] to receive the fax.
Connecting a Telephone or the Optional TELEPHONE 6 KIT
●
For details about connecting a telephone or the optional TELEPHONE 6 KIT, use the procedure to connect to
the telephone line.
Step 4: Connecting to Telephone Line(P. 95)
[Net Switch]
●
Depending on your country, [Net Switch] may appear as an RX mode. In this mode, the machine
distinguishes between receiving phone calls and faxes. To use this mode, you must subscribe to a network
switch service.
●
You must connect the machine to an external telephone or optional handset kit in advance.
Faxing
221
Advertisement
Table of Contents
