Table of Contents
Advertisement
When the machine is connected to the wireless LAN, [
each function.
7
Wait a few minutes.
➠
By default, an IP address is set automatically.
To use a specific IP address, set this manually.
Setting IPv4 Addresses(P. 69)
Setting IPv6 Addresses(P. 73)
If an Error Message Appears during Operation and a Connection Cannot Be Established
●
Press [Close], check the information of the wireless LAN router to which you want to connect, and repeat the
procedure starting from Step 2.
5 Lines LCD Model
Required Preparations
●
Prepare the information of the wireless LAN router to which you want to connect, and keep it close by.
Wireless LAN Router Information Required for Connection(P. 54)
●
When connecting to a wireless LAN router supporting WPA-EAP or WPA2-EAP for the security standard, set
IEEE 802.1X.
Using IEEE 802.1X(P. 310)
1
On the operation panel, select [Wireless LAN Set.] in the [Home] screenand press
[Home] Screen(P. 112)
➠
The [Select Network] screen is displayed.
●
If the login screen appears, enter the System Manager ID and PIN, and then press
Manager ID and PIN(P. 6)
●
If the message [Enable the wireless LAN?] appears, select [Yes] and press
●
If the message [Cannot find the access point.] appears, select [Close] and press
2
Select [Other Connections] and press
3
Select [Manually Enter Network Name] and press
➠
The SSID input screen is displayed.
4
Enter the SSID, select [<Apply>], and press
➠
The [Security Settings] screen is displayed.
Setting Up
] appears on the [Home] screen and screen of
.
.
.
66
.
System
.
.
.
Advertisement
Table of Contents
