Prerequisites
Service position for the board access of the electronics box
Fig. 10
•
The cover latch must be closed before loosening the screws (see Fig. 10).
•
Remove the screws from the sides of the cover (see Fig. 10).
•
Be aware of the weight added by the components attached to the rear side when opening
the latch and the service cover (see 2/Fig. 11).
Fig. 11
•
You can now lower the generator unit. Use an extension to loosen the two screws on the
upper sides (see 3/Fig. 11).
Siemens AG
Medical Solutions
SPR2-250.840.01
Rev. 01
09.05
Seite 13 von 16
CS PS 24
1 - 13
1
ARCOSKOP
System Manual