Alarm.Com ADC-VDB780B Manual page 3

Charging state LED guide
Mode description
Charging
The battery pack is plugged in and
charging.
Fully charged
The battery pack is fully charged.
Failure charging
The battery pack stopped charging
because the device was plugged in
too long. This may signal that there
is an issue with your battery pack.
Remove the charging cabled and re-
attempt charging after an hour. If you
see the same behavior, please
contact your provider.
https://answers.alarm.com/Partner/Installation_and_Troubleshooting/Video_Devices/Alarm.com_Wireless_Video_Doorbell_(A...
Top LED Behavior
Solid orange
Solid green
Alternating orange and green
Button LED behavior
On button press
Solid green =
>75% charged
Solid yellow =
75%-20% charged
Alternating red and blue = <20%
charged
On button press, solid green
Alternating red and white
Updated: Wed, 08 Mar 2023 14:46:43 GMT
3