Something on the page is wrong or missing
Possible cause
Settings in your application
software are incorrect.
The interface cable in not
connected properly.
You have the wrong port
selected on your
Macintosh.
Your Macintosh has a
built-in modem.
Solution
Adjust the settings in your application
Make sure the cable is securely connected to both the printer and
computer.
If your Macintosh has only one serial port, open the Chooser, click
the EPSON Stylus (EX) icon, and then select the modem port.
Connect the interface cable to the printer port. Then open the
Chooser, click the EPSON Stylus (EX) icon, and then select the
printer port.
6-15
Troubleshooting