Never turn off the printer
is flashing, unless the
printer hasn't moved or
made any noise for more
than 5 minutes.
4. Press down the ink cartridge clamp until it locks in place.
5. If you need to replace the other ink cartridge, remove it as
described in "Removing an Empty Ink Cartridge" on
page 5-4. Then follow steps 1 through 4 in this section.
6. Press the
cleaning button and close the printer cover.
The printer moves the print heads and begins charging the
ink delivery system. (Even if you don't press the button, ink
charging begins 60 seconds after you close the clamp.)
The Ppower light flashes and the printer makes various
sounds. Charging takes about two minutes. When it's
finished, you can print again.
Replacing an Outdated Ink Cartridge
If an ink cartridge is more than six months old, you may need
to replace it. How can you tell? You may notice that your
printouts don't look as good as they used to. If print quality
doesn't improve after cleaning and aligning the print heads, you
can replace one or both cartridges.
Maintenance and Transportation