Argo APHPDHW200 Use And Installation Manual page 57

Mode selection
Press " " to select Standard heating mode, Eco
heating mode, Vacation
Intelligent heating mode
heating mode in power-on state and power-off state.
Standard heating mode
The heat pump system will start according to the
actual temperature and
electric heater will not start immediately. After R06
time, the controller will judge if it reaches target
temperature. If not, the electric heater will start.
Intelligent heating mode
The heat pump automatically switches to economy
mode, standard mode and high demand mode
according to different
When ambient temperature reaches T01≤R10, the heat
pump will enter Eco heating mode. (electric heater can
not start up)
When ambient temperature reaches R09≤T01≤R10, the
heat pump will enter standard heating mode. (after R06
time, electric heater will judge whether to start up
according to R03 return differential temperature)
When ambient temperature reaches R08≤T01≤R09, the
heat pump will enter high demand heating mode.
(electric heater will judge
according to R03 return differential temperature)
heating mode,
and High requirement
target temperature. The
ambient temperatures.
whether to start up
Eco heating mode
The heat pump system will start according to the actual
temperature and target
electric heater will be off all the time.
Vacation heating mode
When you select vacation mode, you need to set a
vacation time. The unit will keep operating the mode
you set before the vacation time. Once it reached the
vacation time, the heat pump will exit the vacation
mode and run in the previous setting mode before
vacation.
temperature. But the
EN
57