Table of Contents
Advertisement
e. Log in by using the following SSR credentials and press the Enter key.
uid: essserv1
pw:<{Enclosure serial number}A|B>
Add a 'A' at the end of the enclosure serial number for the left canister for password (use 'B' for
right canister). For example, if the enclosure serial number is 78E00TF, the password for the left
canister will be 78E00TFA.
The essutils tool opens.
Figure 52. The essutils tool
f. Set root password.
Highlight Advanced Tasks and press the Enter key.
Highlight the Command prompt as shown in the following figure and press the Enter key.
Figure 53. Command prompt
You are taken to a shell as shown in the following figure.
Chapter 4. Installing 67
Advertisement
Table of Contents
