AnyTone ARES II Instruction Manual page 16

Power Output
Drain
Modulation
Inter-modulation Distortion
SSB Carrier Suppression
Unwanted Sideband
Frequency Response
Output Impedance
Sensitivity
Selectivity
Adjacent-Channel Selectivity
Image Rejection
IF Frequency
RF Gain Control
Automatic Gain Control(AGC)
Squelch
ANL
Noise Blanker
Audio Output Power
Frequency Response
Built-in Speaker
External Speaker(Not Supplied) 8 ohms, disables internal speaker when connected
Note: Specifications are subject to change without notice due to advancements in
technology.
TRANSMITTER
AM:1-12W(adjustable)
FM:1-40W(adjustable)
USB/LSB:1-35W(adjustable)
8A(with modulation)
FM/AM/SSB
SSB: 3rd order, more than -25dB;
5th order, more than -35dB
55dB
50dB
AM/FM: 450 to 2500Hz
50ohms, unbalanced
RECEPTION
AM:1.0μV for 10 dB(S+N)/N at greater than 1/2watt
of audio output.
FM: 1.0 μV for 20 dB (S+N)/N at greater than 1/2
watt of audio output.
SSB: 0.25μV for 10dB(S+N)/N at greater than 1/2-
watt of audio output.
AM/FM:6dB@3KHz,50dB @9KHz
SSB: 6 dB@2.1KHz,60dB @3.3KHz
60dB AM/FM &70 dB SSB
More than 65dB
AM/FM: 10.695 MHz 1st IF, 455 KHz 2nd IF
SSB: 10.695 MHz
45dB adjustable for optimum signal reception
Less than 10dB change in audio output for inputs
from 10 to 100,000 microvolt
Adjustable; threshold less than 0.5 μV.
Automatic Squelch Control(only AM/FM)0.5 μV
Switchable
RF type, effective on AM/FM and SSB
3 watts into 8 ohms
AM/FM: 300 to 2800Hz
8 ohms, round
12