Electrolux SkyLine ChillS 202 User Manual page 27

This cycle is performed as a multiphase cycle available only with
core probe.
It is possible to choose between two factory presets:
• Freeze to preservation;
• Ready to serve;
AUTOMATIC
Sushi&Sashimi
(Anisakis-free)
Ready to serve
Freeze to preserve
Freeze to preservation consists of 3 phases: Freeze – Sanifica-
tion – Holding (negative).
AUTOMATIC
Sushi&Sashimi
(Anisakis-free)
1
-41°C 1
2
-24°
3
-22°C
-41
-20°C
Ready to serve consists of 5 phases: Freeze – Sanification –
Thawing – Thawing – Holding (positive).
AUTOMATIC
Sushi&Sashimi
(Anisakis-free)
1
-41°C 1
2
-24°
3
15°C 1
4
8°C 1
5
3°C
-41
0°C
To start the cycle proceed as follow:
1. Select Sushi&Sashimi cycle;
2. Select the required preset;
3. Touch Start button;
-22°C
24:00h:m
∞
°C
-22°C
24:00h:m
-2°C
3°C
∞
MAN UAL
°C
1
Chill
0
°C
0°C Soft / Hard
01:30
:00
01:30 h:m
4. When cavity preparation is finished, insert the food in the
cavity, the core probe in the food, close the door and the
cycle starts.
5. At the end of the cycle, if available, the display shows the
consumptions as a recap message.
6. The appliance keeps holding.
IMPORTANT
If the core probe has not been inserted, the cycle
changes automatically from probe to time.
In this case the sanitation could not be guaranteed.
Sous-vide chilling
Freeze to preserve
This cycle is specific for chilling food previously sous-vide
AUTOMATIC
cooked.
Meat balls
This cycle is performed as a chill cycle.
Cycle type
To start the cycle proceed as follow:
Chill
1. Select Sous-vide chilling cycle;
Control
2. If needed set the parameters;
Probe
It is possible to save and store the performed presets from
the lower drawer;
Norms
5:30
3. Touch Start button;
4. When cavity preparation is finished, insert the food in the
cavity, close the door and the cycle starts.
5. At the end of the cycle, if available, the display shows the
consumptions as a recap message.
6. The appliance keeps holding.
Ice-cream
It allows to preserve the ice-cream right after production and
prepare the ice-cream to be displayed.
This cycle is performed as a freeze cycle with core probe.
To start the cycle proceed as follow:
1. Select Ice-cream cycle;
2. Select the required preset;
It is possible to choose between three factory presets:
• Freeze to Holding
• Holding
• Ready to display
AUTOMATIC
Ice-Cream
Ready to display
Freeze to preservation
Holding
Freeze
Timer
Save
preset
-10°C -20°C
27