Initialization; Standards And Approvals - Epson Stylus Pro 3880 User Manual

Operational conditions (temperature and humidity):

Initialization

Hardware initialization at power on
Software initialization when the ESC@
(initialize the printer) command is
received
Panel button initialization by pressing
the Cancel/Reset button on the control
panel for 3 seconds, or SoftReset is
specified from USB

Standards and Approvals

Safety
The printer mechanism is set to its initial state.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
The print buffer is cleared.
The printer returns to the default condition last set.
Print head capping occurs.
Paper is ejected, if any.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
UL 60950-1
CAN/CSA C22.2 No.60950-1
Low Voltage Directive 20006/95/EC
Epson Stylus Pro 3880
EN 60950-1
Product Information
User's Guide
213