The Printer Prints Nothing - Epson Stylus Pro 3880 User Manual

❏ Turn off the printer and make sure the power cord is securely plugged into the printer.
❏ Make sure your outlet works and is not controlled by a wall switch or timer.
❏ Make sure the supplied voltage to the printer matches the rating voltage labeled on the printer.
If not, turn off the printer and unplug the power cord immediately. Contact your dealer for
assistance. See "Contacting Customer Support" on page 201.
Caution:
c
If the supplied voltage and rating voltage do not match, do not plug the printer back in again,
as damage may occur.

The printer prints nothing

The printer is not correctly connected to the computer
Try one or more of these solutions:
❏ Turn off the printer and computer. Make sure the printer's interface cable is securely plugged
into the correct terminal of the computer.
❏ Make sure the interface cable specifications match the specifications for the printer and computer.
❏ Make sure the interface cable is directly connected to the computer without passing through
any device, such as a printer switching device, or extension cable.
Your Epson printer is not selected as the default printer
Install the printer driver if it is not installed yet, and follow the steps below to select your Epson
printer as the default printer.
For Windows XP x64 and XP
1. Click Start, click Control Panel, and then click Printers and Faxes.
2. Right-click EPSON Stylus Pro XXXX.
3. Select Set As Default Printer, then close the window.
For Windows Vista
1. Click , click Control Panel, click Hardware and Sound, and then click Printers.
Epson Stylus Pro 3880 User's Guide
Problem Solver 183