Epson Stylus Pro 3880 User Manual page 136

ENHANCED_MATTE_PAPER
6. Press the Enter
starts automatically.
After the head alignment is completed, the printer exits Menu mode and returns to the READY
status.
Aligning the print head manually
When you want to use the non-Epson special media, you can perform the head alignment
manually. To perform head alignment manually, follow the steps below.
1. Press the Menu/Right r button to enter Menu mode.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
HEAD ALIGNMENT, and press the Menu/Right r button.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select MANUAL, and then
press the Menu/Right r button.
4. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select actual paper
thickness value between 0.1 mm and 0.5 mm.
5. Press the Menu/Right r button to register your value.
6. Press the Enter
Enhanced Matte Paper
Archival Matte Paper
button to start printing. After printing is complete, the head alignment
button, and the printer starts printing.
Epson Stylus Pro 3880 User's Guide
The Control Panel 136