Epson Stylus Pro 3880 User Manual page 131

❏
Platen gap
❏
Thickness pattern
❏
Thickness number
❏
Paper feed adjustment
❏
Drying time
Note:
If you select STANDARD, the printer prints data according to the driver settings. If you select No. X,
the control panel settings override the driver settings.
PAPER TYPE
You can select paper type from MATTE THICK, MATTE THIN, PHOTO PAPER, FINE ART PAPER, or
REMOTE PANEL PAPER. REMOTE PANEL PAPER appears only when the Custom Paper is registered
from EPSON LFP Remote Panel.
PLATEN GAP
You can adjust the distance between the print head and paper. Normally, leave this set to
STANDARD. If you find that printed images are smeared, select WIDE. Select NARROW for printing on
thin paper, or WIDER for printing on thick paper.
Note:
The setting will return to STANDARD after you turn the printer on and off.
THICKNESS PATTERN
You can print the paper thickness detection pattern. If you select STANDARD in PAPER NUMBER, the
pattern is not printed.
THICKNESS NUMBER
Check the paper thickness detection pattern, and then enter the number for the print pattern with
the smallest gap.
PAPER FEED ADJUST A
You can set the paper feed amount of the printable area. The range is -0.70 to 0.70%. If the paper
feed value is too large, white horizontal micro-banding may appear. If the paper feed value is too
small, dark horizontal micro-banding may appear.
Epson Stylus Pro 3880 User's Guide
The Control Panel 131