Epson Stylus Pro 3880 User Manual page 133

NETWORK SETUP
This menu contains the following items. For detailed information about network settings, see the
Administrator's Guide.
NETWORK SETUP
You can configure the network setting of the printer. The following items appear only when
ENABLE is selected.
IP ADDRESS SETTING
You can select the method to set the IP address to the printer. When AUTO or PING is selected, IP,
SM, DG SETTING is not displayed. Select PANEL to set these addresses using the printer's control
panel.
Choose PANEL when setting the IP address, subnet mask, and default gateway using the printer's
control panel.
Choose AUTO when getting the IP address from a DHCP server. The IP address is automatically
obtained from the DHCP server whenever the printer is reset or turned on.
Choose PING when setting the IP address using the arp/ping command. The network interface
uses the IP address set by the arp/ping command. The settings become available when the printer
is reset or turned off and then back on.
IP, SM, DG SETTING
You can set the IP address, Subnet Mask, and Default Gateway to the printer.
APPLE TALK
You can set the AppleTalk settings of the printer.
MS NETWORK
You can set the MS Network settings of the printer.
BONJOUR
You can set the Bonjour settings of the printer.
INIT NETWORK SETTING
You can return the network settings of the printer to the factory default value.
Epson Stylus Pro 3880 User's Guide
The Control Panel 133