Table of Contents
Advertisement
8.4 Balance assembly and installation
Assembly:
Mount stand (1) on stand
holder (2) at weighing
platform
Ensure that the cable (3)
does not get clamped!
Fasten stand, using 4 screws
Once installation is complete, check all screws for tight fit. Otherwise the
person to be weighed may suffer injury.
General instructions for installing the aforementioned balances:
Install the personal balance at the intended location and align it using the screwed
height-adjustable rubber feet, until the air bubble of the bubble level (on the weighing
plate) is in the center.
30
Level balance with foot screws until the air bubble of the
water balance is in the prescribed circle.
Check levelling regularly
TMPN_A-BA-e-2213
Advertisement
Table of Contents
