Thick Paper And Extra Thick Paper; Loading A Custom Paper Size - Epson Aculaser CX11 User Manual

Thick paper and extra thick paper

You can load thick paper (106 to 163 g/m²) or extra thick paper
(164 to 210 g/m²) into the MP tray.
When loading thick or extra thick paper, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings menu in the printer driver.
Paper Size:
Paper Source:
Paper Type:
❏ You can also make these settings on the Setup menu's Tray
Menu on the control panel. See "Tray Menu" on page 293.
Note:
When printing on the back side of previously printed thick paper
manually, set the Paper Type setting on the printer driver to Thick
(Back), Extra Thick (Back) or Thick, Extra Thick.

Loading a custom paper size

You can load non-standard size paper (90 × 110 mm to 220 × 355.6
mm) into the MP tray as long as it meets the following size
requirements.
When loading a custom paper size, you should make paper
settings as shown below:
54
Paper Handling
A4, A5, B5, LT, HLT, GLT, LGL, GLG, F4, or
EXE
MP Tray (up to 20 mm thick stack)
Thick or Extra Thick