GE AED Pro Operator's Manual page 29

ECG DISPLAY USING SEPARATE ECG LEAD WIRES (ECG DISPLAY MODE)
The AED Pro can be used for ongoing display of ECG for attended monitoring of gross morphology. This feature requires
a separately sold ECG Patient Cable Kit. It is not necessary to turn the device off prior to connecting the ECG cable.
While the ECG cable is connected to the AED Pro, the shock capability is disabled.
Indications for use:
A conscious or breathing patient, regardless of age.
Contraindications:
No known contraindications.
The separately sold ECG Patient Cable Kit is required to use this feature. The Kit is designed for connection to ECG
electrodes per AAMI or IEC color convention. Once connected the AED Pro displays and evaluates the patient's ECG
(Lead II). Follow all prompts from the AED Pro.
The kit includes a device connector, which contains electronics (with a non-replaceable battery) that is inserted into the
pad port on the AED Pro, a trunk cable terminating in a molded yoke and three patient leadwires permanently attached to
the yoke. Each leadwire terminates in an electrode connector to attach to a disposable pad
CAUTION: Not a Patient Monitor
The AED Pro is not a true patient monitor with the requisite alarms. Medical personnel should attend
patients at all times while the AED Pro is in use.
Page 28 of 53 Copyright © 2007, General Electric Company 2023486-201 Rev C