Installing The Cpu And Heat Sink - TYAN GC68A-B8056 Service Engineer's Manual

2.1.3

Installing the CPU and Heat sink

Follow the steps below on installing CPU and CPU heat sink. The
GC68A-B8056 supports single
installation is based on an AMD SP5 socket.
Use a T20 Torx screwdriver to loosen the screws securing the force frame.
1.
Note: The force frame will automatically eject after the captive screws are being
released.
By placing your both index fingers on the sides on the metal handle, pull to
2.
release the rail frame. Then lift the rail frame to its fully open position.
Remove the external cap from the rail frame.
3.
AMD Zen 4 (Genoa) series
32
http://www.tyan.com
CPU. The following