Table of Contents
Advertisement
2.5 Installing the Processor and Heat sink
The S5567 supported Intel
Specifications on page 5. Check our website at
processor support.
NOTE:
MITAC TYAN is not liable for damage as a result of operating an
unsupported configuration.
Processor Installation
Follow the steps below to install the processors and heat sinks.
NOTE:
Please save and replace the CPU protection cap when returning for service.
1.
Open the ILM lever.
2. Open the load plate using the finger tab.
®
processors are listed in section 1.2 Hardware
25
http://www.tyan.com
http://www.tyan.com
for latest
Advertisement
Table of Contents
