TYAN GC68A-B8056 Service Engineer's Manual page 187

NBIO SyncFlood Reporting
This value may be used to enable SyncFlood reporting to APML. When set to TRUE
SyncFlood will be reported to APML. When set to FALSE that reporting well be
disabled.
Egress Poison Mask High
These set the enable mask for masking of errors logged in EGRESS_ POISN_
STATUS. For each bit set to 1. Errors are masked. For each bit set to 0, errors
trigger response actions.
Egress Poison Mask Low
These set the enable mask for masking of errors logged in EGRESS_ POISN_
STATUS. For each bit set to 1, Errors are masked. For each bit set to 0, errors
trigger response actions.
Uncorrected Converted to Poison Enable
These set the enable mask for masking of uncorrectable parity errors on internal
arrays. For each bit set to 1, a system fatal error event is triggered for UCP errors on
arrays associated with that egress port. For each bit set to 0, errors are masked.
Uncorrected Converted to Poison Enable
These set the enable mask for masking of uncorrectable parity errors on internal
arrays. For each bit set to 1, a system fatal error event is triggered for UCP errors on
arrays associated with that egress port. For each bit set to 0, errors are masked.
System Hub Watchdog Timer
This value specifies the timer interval of the SYSHUB Watchdog timer in miliseconds
PCIe Aer Reporting Mechanism
This value selects the method of reporting AER errors from PCI Express. A value of
1 allows OS First handling of the errors through generation of a system control
interrupt (SCI). A value of 2 provides for Firmware First handling of errors through
generation of a system management interrupt (SMI).
Firmware First / Firmware First but allow OS First / OS First / Auto
Edpc Control
(0) Disabled; (1) Enabled; (3) Auto
ACS RAS Request Value
No help string
Request Redirect Enabled / Auto
NBIO Poison Consumption
Enabled / Disabled / Auto
Enabled / Disabled / Auto
Direct Request Access Enabled / Request Blocking Enabled /
Enabled / Disabled / Auto
http://www.tyan.com
187