Power Source Description - Cebora SYNSTAR TRIPLE 200M Instruction Manual

synergic curve for the type of welding wire, following the instructions given in the "Service functions" (PROCESS
PARAMS)" section. Remove the gas nozzle and unscrew the torch contact tip. Press the torch trigger until the wire
emerges. BE CAREFUL to keep your face away from the end lance while the wire is emerging, tighten the
contact tip and fit the gas nozzle.
Open the cylinder adapter and adjust the gas flow to 8 – 10 l/min. During welding, display screen A displays the
actual working current and voltage. The displayed values may be slightly different to those set. This can depend on
numerous different factors - type of torch, non-nominal thickness, distance between contact tip and the material
being welded, and welding speed. After welding, the current and voltage values remain stored on the display screen
A. To display the set values,
the knob B will have to be moved slightly, while, by pushing the torch trigger without welding, the display screen A
shows the empty voltage value and a current value of 0.
3�7

Power source description

E
S
C
1
Aluminum
SYNSTAR TRIPLE
200 M
3 Silicon
bronze
C2
A DISPLAY SCREEN
This displays both the welding parameters and all the welding functions
B KNOB
Selects and adjusts welding functions and parameters
C CENTRAL ADAPTER
This is where the welding torch set up for aluminium or the Push-Pull torch is to be connected
C1 CENTRAL ADAPTER
This is where the welding torch set up for iron is to be connected
C2 CENTRAL ADAPTER
This is where the welding torch set up for silicon bronze is to be connected
D SOCKET (-)
E CONNECTOR
Connector for connecting remote controls and the Push-Pull welding torch control cable
F SWITCH
Starts and stops the welding machine.
G MAINS CABLE
H GAS HOSE FITTING
For the welding torch set up for aluminium
H1 GAS HOSE FITTING
For the welding torch set up for iron
H2 GAS HOSE FITTING
For the welding torch set up for Silicon bronze
3301278
392
Art.
2
Steel
PUSH PULL PUSH PULL
0 1
A
H1
B
C1
G
F
D
SYNSTAR TRIPLE Art. 392
200 M
MADE IN ITALY
Nº
I C E 60974- 1
1~ f
IEC 60974-5 1
2 f
IEC 60974-10 (Cl. A)
20A/15V-200A/24V
X 20% 60% 100%
U 0 I 2 200A 140A 120A
96V
U 2 24V 21V 20V
1 ~
50/60Hz U 1 = 23 0V
I 1max = 26 A 1eff 13A
IP 23S I =
2 1
Steel Aluminum
3
Silicon bronze
V
H
H2
27/37