Advertisement
Quick Links
with Metal Mounting Plates and Table Stand
CONTENTS:
INSTRUCTIONS:
1
.Locate tablet case and insert device.
2
.Placing magnetic tablet case on stand
Take a PAD-MSPC10 series case and align PAD-MSPC10 series case
magnets to the (4) corners of the metal stand. Adjust omni-directionally
and tilt to your preference.
Magnetic Splash-Proof Case
for iPAD 8th Gen 10.2", iPad Air 4, iPad Pro 10.5" and More
**Stand comes fully assembled
1. Peel the external
silicone sleeve from the
internal hard case.
2. To open internal hard case,
apply gentle pressure to the
small clips (as shown to the
left). The case will open with all
(4) sides are unclipped.
3. Insert tablet into the back
portion of the hard cover.
x1
888-733-4448
x1
4. Clip the front screen with the
back portion of the hardcover
around all the edges.
5. Place on the external
silicone rubber sleeve over the
hard case again.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for CTA PAD-MSPC10 Series
Summary of Contents for CTA PAD-MSPC10 Series
- Page 1 3. Insert tablet into the back portion of the hard cover. .Placing magnetic tablet case on stand Take a PAD-MSPC10 series case and align PAD-MSPC10 series case magnets to the (4) corners of the metal stand. Adjust omni-directionally and tilt to your preference.
- Page 2 How to fold out tablet kickstand: 1. Locate kickstand at case rear and fold out underneat strap 2. Display tablet at desired viewing angle 3. Push kickstand back into the original spot to return to handheld mode. 888-733-4448...
Need help?
Do you have a question about the PAD-MSPC10 Series and is the answer not in the manual?
Questions and answers