CTA PAD-TAM Instruction Manual

Tabletop arm mount for tablets

Tabletop Arm Mount

for Tablets

2.2 lb

PAD-TAM

Arm

Mount

Fixed Plate

LG Anti-slip Rubber

Bracket Support

Round Anti-slip Rubber

Plastic Cover Plate

Install the Mount to the Arm

0.79 – 3.5 inches

0.33 - 2.8 inches

1. Press the button on the

back to open the top Grip.

2. Put the tablet into the

Mount and adjust the grips

to lock and secure the

tablet into place.

For larger tablets, you may need to press

down on your tablet to expand the

spring-loaded grip to fit it into the mount.

Table of Contents

Do you have a question about the PAD-TAM and is the answer not in the manual?

Page 1 Tabletop Arm Mount PAD-TAM for Tablets Mount Fixed Plate LG Anti-slip Rubber 0.33 - 2.8 inches Bracket Support Round Anti-slip Rubber Plastic Cover Plate 2.2 lb Install the Mount to the Arm Adjust the Weight Balance Loading a Tablet 1. Press the button on the back to open the top Grip.
Page 2 Make sure installation is done correctly before loading your tablet to the mount. Your tablet must be a maximum of 2.2 lb to use this arm mount. Any accidental drops or damages are not the responsibility of CTA Digital Inc. Note: This product is intended for indoor use only.