Table 5 Boot Manager Variables - Nokia EM5400 Installation Manual

Table 5 Boot Manager Variables

Variable
boot manager
revision
autoboot
bootwait
boot-file
boot-flags
boot-device
Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
Description
Version number of the boot manager. You cannot set this
variable from the command line.
If autoboot is set to no, the EM5400 appliance stops at the boot
manager command line during the boot process.
If autoboot is set to yes, the EM5400 appliance does not stop at
the boot manager command line during a boot up. The appliance
waits for the amount of time specified in bootwait for input from
the keyboard. If input is received, the boot manager goes to the
boot manager command line; otherwise, it proceeds with the
boot up.
Default is yes.
Amount of time, in seconds, that the boot manager waits for
input during a boot up when autoboot is set to yes.
Default is three seconds.
Name of the operating system kernel file.
Default is /image/current/kernel.
String of flags passed to the kernel.
Default is -x.
Device from which the boot-file loads.
Default is wd0.
Boot-Manager Variables
61