M&C PMA Series Instruction Manual page 16


Check output signals at 0,0% O
If a gas mixture is analysed, the single gas components have to be checked
concerning potential cross sensitivity and regarded for zero calibration. (see
chapter 16.1.1 and 16.1.2).
N O T E !

Shut off pressure outlet valve and bottle valve.

Disconnect hose connection from the analyser.
Zero calibration is finished.
After zero calibration the span has to be calibrated too.
N O T E !
16
:
2
Output signal
0-1 V
0-20 mA
4-20 mA
PMA20 | 1.00.01
Measurement
0 V
0 mA
4 mA
www.mc-techgroup.com