Table of Contents
Advertisement
Back to top
7
Remove the CONT PCB (
NOTE
• Note that one coaxial cable remains connected to
the CONT PCB.
• HEAT CONDUCTING PAD and CONT PCB are
sticking together.
(1)
Place your hand so that the CONT PCB does not
fall, and lightly press the connector part to remove
the CONT PCB.
NOTE
Use the tweezers etc to vertically connect or disconnect
the coaxial cable connector.
Applying force to one side of the connector only will damage
the connector.
Notes on assembling
Match both connectors, and then
vertically insert the cable connector into
the mating connector.
From here, assembling procedure
8
Assemble the parts in the reverse order of the disassembly procedure.
).
bl
4 Replacement
HEAT CONDUCTING PAD
(2)
Disconnect the coaxial cable.
11
Coaxial cable
PW4NX Service Manual
Coaxial cable
80
Advertisement
Table of Contents
