Table of Contents
Advertisement
Cleanup
7.
Spray cleaning fluid:
a.
Turn Prime Knob forward to
SPRAY position and verify Spray
Tip is in the UNCLOG position.
b.
Point Spray Gun into a waste pail
and trigger until cleaning fluid is
emptied from the Cup.
8.
Verify Cup is empty and remove Cup
from sprayer by depressing the Cup
Release Lever and rotating Cup out of
the Cup Support.
24
9.
Clean Cup, Cup Lid and Pump Filter in
warm water.
10. Wipe out Cup Support with wet rag.
Reinstall Cup, Pump Filter and Cup Lid
back into the Cup Support.
11. Repeat steps 6 and 7 as needed until
sprayer is clean. Repeat steps 6 and 7
as needed until sprayer is clean.
12. Before storage, circulate and spray a
small amount of Pump Armor Storage
Fluid.
13. Engage Trigger Lock. Turn Prime Knob
up to PRIME position.
14. Remove Battery.
15. Remove Spray Tip and Spray Tip Guard.
16. Clean Spray Tip and Spray Tip Guard
with warm water and an old toothbrush.
Reinstall Spray Tip and Spray Tip
Guard.
17. Turn Spray Tip 90 degrees for storage
and CLOSE Storage Plug on Cup Lid.
3A9301C
Advertisement
Table of Contents
