EN • FR • ES DIESEL EXHAUST FLUID (DEF) (ISO 22241) NOT APPROVED FOR USE IN EXPLOSIVE ATMOSPHERES OR HAZARDOUS LOCATIONS MODEL 127649 MAX WPR 345 kPa (3.4 bar) (50 psi) Important Safety Instructions Read all warnings and instructions in this manual.
INDEX GENERAL WARNINGS FIRST AID RULES WARNINGS THE DISPENSING NOZZLE INTENDED USE TECHNICAL DATA INSTALLATION MODES OF OPERATION PREVENTION MISFILLING (optional) PRELIMINARY CHECK INITIAL START UP MAINTENANCE MALFUNCTIONS DEMOLITION AND DISPOSAL DIMENSIONS WARRANTY M0302...
It should remain available to end users and specialist vation installation and maintenance technicians for consultation at any time. Reproduction All reproduction rights are reserved by Graco Inc. The text cannot be reprinted without the written permission rights FIRST AID RULES Contact with...
B.1 WARNINGS The following warnings are for the setup, use, grounding, and repair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to procedure-specific risks. When these symbols appear in the body of this manual or on warn- ing labels, refer back to these Warnings.
Page 5
Personal Wear appropriate protec- This equipment includes but is not limited to: Protective tive equipment when in Protective eyewear, safety shoes, close-fitting Equipment the work area to help pre- clothing and hearing protection. vent serious injury, includ- Respirators, protective clothing, and gloves as ing eye injury, hearing loss, recommended by the fluid and solvent manu- inhalation of toxic fumes,...
DISPENSER NOZZLE FEATURING AUTOMATIC STOP DE- VICE, MADE OF NON-CONDUCTIVE PLASTIC AND DE- SIGNED TO BE USED WITH WATER/UREA SOLUTION (DEF, AUS32). ALSO COMPATIBLE WITH WATER C.1 INTENDED USE P.N. 127649 WATER/UREA SOLUTION - D.E.F. - AUS 32, ACCORDING TO DIN 70070 WATER CONDITIONS...
MODES OF OPERATION FOREWORD The main feature of these nozzles is that they are easy to use. Two operating modes are available: Dispense by operating the nozzle lever. To interrupt dis- ASSISTED MODE pensing manually, release the lever. Use the opening lever lock device for automatic dispens- AUTOMATIC MODE ing.
PRELIMINARY CHECK NOTICE Check the correct operation of the lock device, ac- cording to the following procedure: 1 Take a graduated receptacle with a capacity of 20 litres (5 gal) 2 Begin dispensing into the receptacle, setting the lever in the minimum flow position, until the receptacle is full.
INITIAL START UP FOREWORD Only start dispensing after making sure that assembly and installation have been correctly performed. WARNING TOXIC FLUID OR FUMES HAZARD The faulty operation of this device could cause the spill of liquids that are hazardous for people and the envi- ronment.
DEMOLITION AND DISPOSAL Foreword If the system needs to be disposed, the parts which make it up must be delivered to companies that specialize in the recycling and disposal of industrial waste and, in particular: Disposal of The packaging consists of biodegradable cardboard which can be packing materials delivered to companies for normal recycling of cellulose.
With the exception of any special, ex- tended, or limited warranty published by Graco, Graco will, for a period of twenty-four months from the date of sale, repair or re- place any part of the equipment determined by Graco to be defective.
Need help?
Do you have a question about the 127649 and is the answer not in the manual?
Questions and answers