Table of Contents
Advertisement
4.
Remove Cup Lid and pour extra paint
back into paint can.
5.
Remove Pump Filter from Cup and set
aside for cleaning.
To avoid fire and explosion do not spray
solvents through the Spray Tip. Remove
Spray Tip and Spray Tip Guard, and clean
in a bucket of compatible solvent.
NOTICE
To avoid damage, never immerse the
electronic Spray Gun in water or other fluid.
3A9301C
6.
Circulate cleaning fluid, fill Cup half-full
of cleaning fluid, see Cleaning Fluid
Compatibility, page 26, and reinstall
Cup Lid. Verify Storage Plug is OPEN.
a.
Verify the Prime Knob is pointed
up in the PRIME position and turn
Spray Tip to the UNCLOG
position.
b.
Disengage Trigger Lock and turn
Flow Control to 10.
c.
Point Spray Gun into a waste pail
and trigger for 15 seconds.
Cleanup
23
Advertisement
Table of Contents
