6.
Turn the Prime Knob forward to SPRAY
position.
7.
To prime the Hose and Spray Gun, point
the Spray Gun into a waste pail and pull
the Trigger for 10 seconds or until there
is a steady stream of paint. This will
purge air (and storage fluid) from the
Hose and Gun.
NOTE: To avoid pump damage, if the
sprayer does not spray after 10 seconds,
STOP and repeat STARTUP.
8.
Turn the Spray Tip forward to SPRAY
position.
You are now ready to spray!
3A9301C
Startup
15