How To Set Up The Specimen Cabinet - Hologic Trident User Manual

4.7

How to Set Up the Specimen Cabinet

1.
2.
3.
Note
4.
5.
Note
MAN-02098 Revision 008
Open the Cabinet door.
Place the specimen.
•
For a contact image, put the specimen on the contact surface of the Cabinet.
•
For a magnification image, put the specimen on the 1.5X Stage or the 2.0X Stage in
the Cabinet. See the
Close the Cabinet door.
Turn the Key Switch from the locked position to the unlocked position.
Refer to How to Acquire an Image
figure Cabinet Components
X-ray is enabled when the door is closed. If the door is
opened during an exposure, the exposure ends
automatically.
on page 25 for steps about image acquisition.
If you press the X-RAY button to end an exposure, an error
message appears. To start another exposure, select the OK
button then select the status icon in the taskbar at the bottom
of the screen. Select the Clear All Faults option. When
READY shows in the system message area, press the X-RAY
button.
Trident User Guide
Chapter 4: The User Interface
on page 11.
Page 31