Changing Language; Configuration Tool; Using The Configuration Tool - Oki B411d User Manual

• Resetting the printer and clearing the buffer after printing has
been cancelled.
Note
To reset the printer to the default settings of the
manufacturer, the Online button is pressed and held
down while the printer is switched on with the main
power switch. The LED indicators blink when the
printer has reset to the default settings.

Changing language

The default language used by your printer for display messages
and for report printing is English. If required, this can be changed
to:
• Canadian French
• Latin American Spanish
• Brazilian Portuguese
Note
See the Setup Guide supplied with your printer for
information on how to change the display language.

Configuration Tool

The Configuration Tool is used to control and change the various
printer settings.

Using the Configuration Tool

Viewing or changing the printer settings are carried out as
follows:
With the printer connected to your computer and plugged in:
1. Click Start > All Programs > Okidata > Configuration
Tool and select the Configuration Tool.
2. Click Tools > Register Device.
3. Be sure the B411 printer is selected, then click Register.
Click Yes to confirm.
17 > B411/B431 Operator Panels