Table of Contents
Advertisement
When the rear paper stacker is folded down paper exits the printer through the rear of the
printer and is stacked here face up. This is mainly used for heavy print media. When used
in conjunction with the multi purpose feed tray, the paper path through the printer is
essentially straight. This avoids bending the paper around curves in the paper path and
enables feeding of up to 250g/m² media.
C
HANGING THE DISPLAY LANGUAGE
The default language used by your machine for display messages is English. If required,
this can be changed using the Panel Language Set-up utility.
G
ETTING STARTED
P
OWER SAVING MODE
If you do not use the machine for a while, it will enter the power saving mode to control
the power consumption of the device. To cancel or initiate power saving mode, press the
Power Save / Wake Up button on the control panel.
NOTE
Printer does not turn to "Sleep Mode" in case that Printer is connected via
USB interface.
Additionally, during Sleep Mode, it can not detect when USB cable is
inserted in Printer and it can not transit to release sleep mode by receiving
the data via local port.
To release Sleep mode is required by pushing Power Save/Wake up button
in this case.
S
WITCHING OFF
If you have an SD card fitted, always follow the correct shutdown
procedure to ensure that no data is lost.
1.
Press the Enter button on the control panel to enter the menu.
2.
Press the Menu down button and scroll to the Shutdown menu.
3.
Press the Enter button.
4.
Press the Enter button to continue.
5.
Press the Enter button to execute.
6.
At the prompt, turn the power switch OFF.
CAUTION!
Introduction > 13
Advertisement
Table of Contents
