Oki B411d User Manual page 56

• For two-sided (duplex) printing on headed paper,
load the paper with the pre-printed side down and top
edge into the printer.
• Envelopes should be loaded flap down, face up with the
top edge to the left and short edge into the printer.
Note
Do not select Duplex printing on envelopes.
• Load Transparencies face up and top edge into the
printer.
• For heavyweight paper or cardstock open the rear
output cover to collect the printed output. This will give
the paper a nearly straight path through the machine,
avoiding paper jams and damage to the paper.
4. If required, set the media size and orientation in the media
menu using the control panel, then issue the print
command.
Damage to the printer may occur if the incorrect
paper setting is used when printing on a different
media.
Note
> You can also set the media type in your printer
driver. However, the printer driver settings will override
the settings on the control panel or Configuration Tool.
> Remember to reset the printer for normal paper after
printing on a different media.
56 > B411/B431 Paper Recommendations
CAUTION!