Turning On; Changing The Display Language - Oki C9600hdtn User Manual
Hide thumbs
Also See for C9600hdtn:
- Configuration manual (259 pages) ,
- User manual (130 pages) ,
- Printing manual (111 pages)
Table of Contents
Advertisement
T
O
URNING
N
NOTE
If you have used the Shutdown/Restart button to reduce the
printer to a state where the LCD panel indicates it can be
turned off or restarted, you can turn it on again by pressing the
Shutdown/Restart button.
1.
To start the printer after it has been turned off by using
the Power switch, set the Power switch to On.
C
HANGING THE DISPLAY LANGUAGE
Carry out the following steps to change the language that is
displayed on the LCD display:
1.
Ensure that the LCD panel indicates that the printer is
ready to print.
2.
Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly as
required until Menus is highlighted.
3.
Press the Enter button to select Menus.
4.
Press the Up-arrow or Down-arrow buttons repeatedly
as required until System Adjust is highlighted.
5.
Press the Enter button to select System Adjust.
C9600 User's Guide> 47
Advertisement
Table of Contents
