Paper Exit Paths - Oki B411d User Manual

If required, set the media size and orientation in the
Configuration tool, then issue the print command.
Damage to the printer may occur if the incorrect
paper setting is used when printing on a different
media.
Note
> You can also set the media type in your printer
driver. However, the printer driver settings will override
the settings on the control panel or Configuration Tool.
> Remember to reset the printer for normal paper after
printing on a different media.

Paper Exit Paths

Face down exit (Default)
• The paper exits from the top of the printer.
• For use with paper less than 28 lb.US Bond (105 g/m²)
• Capacity 150 sheets 20 lb. US Bond (75 g/m²)
59 > B411/B431 Paper Recommendations
CAUTION!