Table of Contents
Advertisement
12/42
Bosch Rexroth AG
6.5
Attaching Precision Module to adjoining structures
NOTICE
Risk of product loosening or warping due to improper mounting.
Damage to the product.
Be sure to use enough supports for the system dynamics at work.
f
Risk of frame bending.
Damage to the product.
Support the frame along its entire length (A)
f
Do not support the Precision Module at the end blocks (B)
f
Remove the cover plate or sealing strip, if present ! 6.10 or 6.12.
f
Use reference edges (29).
f
Fasten the product to the specified tightening torque.
f
If necessary, install cover plate or sealing strip ! 6.10 or 6.12.
f
When mounting to the frame, keep a minimum distance of 5 mm from the end blocks.
f
A
29
Fig. 5: Mounting
Precision Modules PSK | R320103170/2022-10
B
Advertisement
Table of Contents
