Table of Contents
Advertisement
26/42
Bosch Rexroth AG
6.8.3
Moving or removing the switch
WARNING
Switch off the power supply.
Death or serious injury.
Before working on the electrical equipment, switch off the power supply and secure it against reactivation.
f
When checking function, please follow the instructions in the "Start-up" section. ! 8.
Death or serious injury.
Before starting work, switch off the power supply and secure it against reactivation.
f
Secure the frame against falling.
f
Observe the safety regulations for working with compressed air.
f
1.
Loosen the knurled head screw (31) on the switch.
2.
To set a new switching point, move the switch and then secure in place with the knurled head screw.
3.
To remove, pull the switch out of the mounting channel.
1
3
Fig. 18: Moving the switch
31
Precision Modules PSK | R320103170/2022-10
Advertisement
Table of Contents
