Overview Of Lubrication Types; Lube Fittings - Bosch rexroth PSK Instructions Manual

R320103170/2022-10 | Precision Modules PSK
NOTICE
Lubrication of the preserved carriage with H1 lubricant.
Loss of H1 approval
H1 lubricants or release agents (anti-corrosion agents) only have H1 approval if they are separated and
f
unmixed (including at the lubrication point). A blend of two H1 approval lubricants or separating agents
does not have H1 approval.
No approval or authorization for use in the food industry
Because of the use of H1 lubricants, the products listed under 1.1 do not have authorization or approval for
f
use in the food industry.
Components lubricated at the factory
Components lubricated at the factory, such as deep-groove ball bearings, do not use H1 lubricants.
f
11.2

Overview of lubrication types

LSS: Basic lubrication with Dynalub at the factory
LPG: Preserved variant without basic lubrication
LCF: Prepared for connection to central lubrication systems
with liquid grease
LSC: Basic lubrication with Tribol GR 100 at the factory
For further information regarding each lubrication type, please refer to the following sections.
11.3

Lube fittings

A
Fig. 27: Lube fittings
Types
A Ball-type lube nipple (from the factory)
B Straight connectors for plastic tubes and metal pipes (accessory)
C Rotatable elbow plug-in connections rotatable for plastic tubes and metal pipes (accessory)
For dimensions, part numbers and data ! see "Precision Modules PSK" catalog.
X
B
Bosch Rexroth AG
C
35/42