Table of Contents
Advertisement
Cleaning and care
Cleaning the ceramic surface
Risk of damage by pointed
objects.
The seal between the SmartLine
element and the worktop could
suffer damage.
Do not use pointed objects for
cleaning.
Not all soiling and residues can be
removed using a solution of
washing-up liquid.
An invisible film can develop that can
lead to discolouration of the glass
ceramic surface. This discolouration
cannot be removed.
Clean the ceramic surface regularly
with a proprietary ceramic glass
cleaning agent.
Remove any coarse soiling with a
damp cloth and more stubborn
soiling with a shielded scraper blade
suitable for use on glass.
Then clean the ceramic glass surface
with the Miele ceramic and stainless
steel hob cleaner (see "optional
accessories") or with a proprietary
ceramic glass cleaner applied with
kitchen paper or a clean cloth. Do not
apply the cleaner while the ceramic
surface is still hot, as this can result in
marking. Please follow the cleaning
agent manufacturer's instructions.
Finally wipe the glass ceramic surface
with a damp cloth and polish with a
soft, dry cloth.
28
Residues can burn onto the ceramic
surface the next time it is used and
cause damage to the glass ceramic
surface. Ensure that all cleaning agent
residues are removed.
Spots caused by limescale, water
and aluminium residues (spots with a
metallic appearance) can be removed
using Miele's ceramic and stainless
steel hob cleaner.
Danger of burning due to hot
surfaces.
The surfaces get hot during cooking.
Wear oven gloves when removing
residues of sugar, plastic or
aluminium foil from a hot ceramic
surface with a shielded scraper
blade.
Should any sugar, plastic or
aluminium foil spill or fall onto the
hot ceramic surface while it is in use,
switch off the cooking zone.
Then carefully scrape off these
residues immediately whilst they are
still hot, using a scraper blade
suitable for use on glass.
Afterwards, clean the ceramic surface
in its cooled state, as described
above.
Advertisement
Table of Contents
