Sony STR-AZ3000ES Startup Manual page 371

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Displaying a test screen (Test Picture for HDMI OUT A/Test Picture for HDMI OUT B)
You can display a test screen with specific resolution and frame rate for HDMI OUT A and HDMI OUT B (ZONE 2) jacks.
Select [Setup] - [Install Settings] from the home menu.
1
Select [Test Picture for HDMI OUT A] or [Test Picture for HDMI OUT B].
2
3 Select the setting you want.
8K/60Hz/4:2:0 (*)
4K/120Hz/4:4:4 (*)
4K/60Hz/4:4:4
4K/24Hz/4:4:4
1080p/60Hz
480p/60Hz
Off
*
When [HDMI OUT B Mode] is set to [Zone2], this setting does not appear in [Test Picture for HDMI OUT B].
Hint
You can also display a test screen with 480p/60 Hz for HDMI OUT A and HDMI OUT B (ZONE 2) jacks by pressing TEST on the remote control.
HDMI audio signals are not output while the test screen is displayed.
5-037-021-11(1) Copyright 2022 Sony Corporation
282