Sony STR-AZ3000ES Startup Manual page 234

Multi channel av receiver

Hide thumbs Also See for STR-AZ3000ES:

Table of Contents

Multi Channel AV Receiver

STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES

Setting up a wired LAN connection

You can set up a wired LAN connection by the following procedure. Connect the receiver and the router with a LAN cable beforehand.

Select [Setup] - [Network Settings] from the home menu.

Select [Internet Settings].

Select [Next] when [LAN cable connection was detected. Perform Wired LAN setup.] appears.

Select [Auto] on the TV screen for the IP address acquisition method.

To set the IP address manually, select [Manual] and follow the on-screen instructions.

The network settings are displayed on the TV screen.

Select [Save & Connect].

The receiver starts connecting to the network.

When the receiver is successfully connected to the network, [NETWORK] lights up on the display panel of the receiver.

See [Network Connection Status] in the [Network Settings] menu when checking the network settings.

Chapters

Table of Contents