Sony STR-AZ3000ES Startup Manual page 231

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Listening with BLUETOOTH headphones/speakers (Pairing operation)
You can listen to audio sources playing via this receiver by using BLUETOOTH headphones/speakers.
Select [Setup] - [Bluetooth Settings] from the home menu.
1
2 Set [Bluetooth Mode] to [Transmitter].
Turn on the BLUETOOTH headphones/speakers and set them to pairing mode.
3
Select the name of the headphones or speakers from the [Device List] in the [Bluetooth Settings] menu.
4
If you cannot find your device name in the list, select [Scan].
After [CONNECTING] flashes and the name of the headphone or speaker is displayed on the display panel, pairing is complete.
* "XXXXXX" represents the name of a detected BLUETOOTH device.
Press one of the input buttons to select the input you want.
5
The sound is output from the BLUETOOTH headphones/speakers. No sound is output from the receiver.
Adjust the volume of the BLUETOOTH headphones/speakers.
6
Volume control on the receiver and remote control only works for the BLUETOOTH headphones/speakers.
Note
The BLUETOOTH device will be reconnected when [Bluetooth Mode] is changed from [Receiver] to [Transmitter]. Press BLUETOOTH TX/RX on the remote control to reconnect quickly.
You can also press BLUETOOTH TX/RX on the remote control to switch [Bluetooth Mode]. However, you cannot switch [Bluetooth Mode] when [NOT. USE] appears on the display panel. Check if you
are already using the BLUETOOTH function.
You may not be able to adjust the volume level depending on the BLUETOOTH receiver.
When [Bluetooth Audio] is selected as an input, you cannot set [Bluetooth Mode] to [Transmitter].
You can register up to 10 sets of BLUETOOTH receiver. If a 11th set of BLUETOOTH receiver is registered, the least recently connected BLUETOOTH receiver will be replaced by the new ones.
This receiver can display up to 15 detected BLUETOOTH receiver in the [Device List].
You cannot change the settings of [Sound Field] and [360 Spatial Sound Mapping] in the options menu while transmitting sound.
Some content cannot be output due to copyright protection.
The audio output from the BLUETOOTH receiver may be delayed compared to that from this receiver because of the characteristics of BLUETOOTH wireless technology.
Audio cannot be output to BLUETOOTH devices that do not support SCMS-T.
No sound is output from the speakers or HDMI OUT jacks when BLUETOOTH receiver is successfully connected to this receiver.
The [Bluetooth Audio] function is disabled when [Bluetooth Mode] is set to [Transmitter].
If you connect a BLUETOOTH device during streaming playback, playback will stop. If you connect a BLUETOOTH device while playing music from a USB device, playback will pause.
Hint
If the BLUETOOTH device in step 3 is the most recently connected device, you can connect it to this receiver automatically by simply pressing BLUETOOTH RX/TX on the remote control. In this case,
you do not need to perform step 4.
Related Topic
Selecting the BLUETOOTH mode (Bluetooth Mode)
Checking the BLUETOOTH device list (Device List)
5-037-021-11(1) Copyright 2022 Sony Corporation
142