Sony STR-AZ3000ES Startup Manual page 101

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Indicators on the display panel
1.
Playback channel indicator
Indicates the speaker that is designated to output sound. Shows how the receiver down-mixes or up-mixes the source sound, based on the speaker settings.
FWL (for STR-AZ7000ES only)
Front Wide Left
FWR (for STR-AZ7000ES only)
Front Wide Right
S-Center
S-Center
L
Front Left
R
Front Right
C
Center
SL
Surround Left
SR
Surround Right
SBL
Surround Back Left
SBR
Surround Back Right
H1L
Height1 Left
H1R
Height1 Right
H2L (for STR-AZ7000ES/STR-AZ5000ES only)
Height2 Left
H2R (for STR-AZ7000ES/STR-AZ5000ES only)
Height2 Right
H3L (for STR-AZ7000ES only)
Height3 Left
H3R (for STR-AZ7000ES only)
Height3 Right
2.
Speaker system indicator
3.
C2 (for STR-AZ7000ES/STR-AZ5000ES only)
Lights up when center 2 speaker is connected.
4.
BI-AMP
Lights up when [Surround Back Speaker Assign] in the [Speaker Settings] menu is set to [BI-AMP] to use a bi-amplifier connection.
5.
(up)/ (down)/ (left)/ (right)
Indicates currently available operation on the display panel using
6.
SW
Lights up when subwoofer(s) is (are) connected and the audio signal is output from the PRE OUT SUBWOOFER jack(s).
7.
IN-CEILING
Lights up when the In-Ceiling Speaker Mode is activated.
8.
ST
Lights up when the receiver tunes to an FM stereo broadcast.
9.
NETWORK
Lights up when the receiver is connected to a wireless LAN or wired LAN network.
10.
UPDATE
Lights up when a software update is available for download.
11.
ZONE 2, ZONE 3
The applicable indicator lights up when [Power] for [Zone2] or [Zone3] in the [Zone Controls] menu is set to [On].
12.
VOLUME
Displays the current volume.
13.
DSD Native
Lights up when the receiver performs DSD Native playback.
14.
HDMI OUT A+B
Displays the output you have selected using HDMI OUT on the front panel or HDMI OUTPUT on the remote control. Turns off when [HDMI OUT OFF] is selected.
15.
BLUETOOTH indicator
BT lights up when a BLUETOOTH device is connected. It blinks during BLUETOOTH connection operation.
BT TX lights up when [Bluetooth Mode] is set to [Transmitter].
16.
D.C.A.C.
Lights up when the measurement results of the Auto Calibration function are applied.
17.
A.P.M.
Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the D.C.A.C. IX (Digital Cinema Auto Calibration) function.
18.
D.R.C
(up)/ (down)/ (left)/ (right) on the remote control.
12