Sony STR-AZ3000ES Startup Manual page 291

Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Performing Auto Calibration (Auto Calibration Settings)
You can perform Auto Calibration from your listening position.
Select [Setup] - [Speaker Settings] from the home menu.
1
Select [Auto Calibration Settings].
2
3 Select [Auto Calibration], and then select [Start].
4 Follow the instructions on the TV screen to check the connection of external devices, set the speaker configuration, and perform automatic measurement using the
measurement microphone and microphone stand.
Auto Calibration is performed twice.
5 When the measurement is complete, select the item you want.
Save: Saves the measurement results and exits the setting process.
Retry: Performs the Auto Calibration again.
Discard: Exits the setting process without saving the measurement results.
Save the measurement results.
6
Select [Save] in step 5.
Note
If the measurement fails, follow the message, then select [Retry]. For details on the error code and warning message, see
Hint
The Auto Calibration function will be canceled if you perform the following during the measurement process:
Turn the receiver on or off.
Press the input buttons on the remote control or on the receiver.
Press (muting).
Press SPEAKERS on the receiver.
Connect your BLUETOOTH headphones/speakers.
Press HDMI OUT.
Press AMP MENU.
Press HOME, WATCH, or LISTEN.
Press BACK.
Change the volume level.
"List of messages after Auto Calibration
5-037-021-11(1) Copyright 2022 Sony Corporation
202
measurements."