Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted. If this is the case, place the antenna (aerial)

farther away from the receiver.

When connecting an optical digital cable, insert the plugs straight until they click into place.

Do not bend or tie optical digital cables.

All of the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling frequencies.

When connecting TV audio output to the receiver via the TV AUDIO IN (L/R) jacks, set the audio output level of the TV to "Fixed" if it can be switched between "Fixed" or

"Variable."

When you connect the TV to HDMI OUT B (ZONE 2) jack, be sure to set [HDMI OUT B Mode] to [Main] in the [HDMI Settings] menu. Press HDMI OUT repeatedly on the remote

control to select [HDMI B] or [HDMI A+B]. The home menu is not displayed on the TV screen if [HDMI OUT B Mode] is set to [Zone2].

When you connect a TV compatible with the eARC or ARC function, turn on the eARC or ARC function and connect the eARC/ARC-compatible HDMI input jack of your TV to

HDMI OUT A jack of the receiver.

Table of Contents