Sony STR-AZ3000ES Startup Manual page 293

Multi channel av receiver

Hide thumbs Also See for STR-AZ3000ES:

Table of Contents

Multi Channel AV Receiver

STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES

Selecting the Auto Calibration type (Calibration Type)

You can select a calibration type after you have performed the Auto Calibration and saved the settings.

Select [Setup] - [Speaker Settings] from the home menu.

Select [Auto Calibration Settings].

Select [Calibration Type].

Select the setting you want.

Full Flat: Makes the measurement of frequency from each speaker flat.

Engineer: Sets to "the Sony listening room standard" frequency characteristics.

Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.

This function does not work when [Direct] is being used and an analog input is selected.

The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.

Chapters

Table of Contents