Table of Contents
Advertisement
Help Guide
Multi Channel AV Receiver
STR-AZ7000ES/STR-AZ5000ES/STR-AZ3000ES
Speaker configuration and speaker pattern settings
Select the speaker pattern using [Speaker Pattern] in the [Setup] - [Speaker Settings] - [Manual Speaker Settings] menu according to the speaker configuration which you are using.
Speaker configuration in Main
configuration in
zone
9.1.4-channel speaker system
using front wide speakers (for STR-
Not used
AZ7000ES)
7.1.6-channel speaker system (for
Not used
STR-AZ7000ES)
5.1.5.3-channel speaker system
(360RA Reference configuration)
Not used
(for STR-AZ7000ES)
7.1.4-channel speaker system (for
Not used
STR-AZ7000ES/STR-AZ5000ES)
7.1.2-channel speaker system
using two center speakers (for
Not used
STR-AZ7000ES/STR-AZ5000ES)
7.1.2-channel speaker system
using front Dolby Atmos enabled
Not used
speakers
7.1.2-channel speaker system
Not used
7.1-channel speaker system
Not used
5.1.4-channel speaker system
using top front and top rear
Not used
speakers
5.1.2-channel speaker system
Not used
using top middle speakers
7.1-channel speaker system with
2-channel
Zone 2 connection
5.1.2-channel speaker system with
Not used
bi-amplifier connection
*1
For STR-AZ3000ES/STR-AZ5000ES, you can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back speakers.
For STR-AZ7000ES, you can only set [Surround Back Speaker Assign] if the speaker pattern is set to a setting that does not have surround back speakers and to a setting other than [5.0.5.3(360RA Ref.)] or
[5.1.5.3(360RA Ref.)].
*2
You can only set [Height1 Speaker Assign] if the speaker pattern is set to a setting that does not have height speakers and you do not use the Acoustic Center Sync function.
*3
You can only set [Height2 Speaker Assign] if height speakers is not connected to SPEAKERS HEIGHT 2 terminals and you do not use the Acoustic Center Sync function.
*4
You can only set [Height3 Speaker Assign] if height speakers is not connected to SPEAKERS HEIGHT 3 terminals and you do not use the Acoustic Center Sync function.
Related Topic
Selecting the speaker pattern (Speaker Pattern)
Assigning the surround back speaker terminals (Surround Back Speaker Assign)
Connecting 9.1.4-channel speaker system using front wide speakers (for STR-AZ7000ES)
Connecting 7.1.6-channel speaker system (for STR-AZ7000ES)
Connecting 5.1.5.3-channel speaker system (360RA Reference configuration) (for STR-AZ7000ES)
Connecting 7.1.4-channel speaker system (for STR-AZ7000ES/STR-AZ5000ES)
Connecting 7.1.2-channel speaker system with two center speakers (for STR-AZ7000ES/STR-AZ5000ES)
Connecting 7.1.2-channel speaker system using front Dolby Atmos enabled speakers
Connecting 7.1.2-channel speaker system
Connecting 7.1-channel speaker system
Connecting 5.1.4-channel speaker system using top front and top rear speakers
Connecting 7.1-channel speaker system with Zone 2 connection
Connecting to Sony wireless rear speakers/subwoofer
When your TV has the S-CENTER SPEAKER IN jack
Performing Auto Calibration (Auto Calibration Settings)
Speaker
[Surround Back
[Height1 Speaker
Speaker Assign]
Assign] (STR-
zone 2
(*1)
AZ3000ES only) (*2)
[Off]
Not available
[Off]
Not available
[Off]
Not available
[Off]
Not available
[Off]
Not available
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Zone2]
[BI-AMP]
[Off]
5-037-021-11(1) Copyright 2022 Sony Corporation
[Height2 Speaker
Assign] (STR-
AZ5000ES only) (*3)
AZ7000ES only) (*4)
Not available
[Off]
Not available
[Off]
Not available
[Off]
[Off]
[Off]
[Center 2]
[Center 2]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Off]
[Zone2]
[Zone2]
[Off]
[Off]
31
[Height3 Speaker
Speaker pattern to be
Assign] (STR-
selected in [Speaker
Pattern]
[9.1.4 (FW+TF+TR)]
[7.1.6 (TF+TM+TR)]
[5.1.5.3 (TFC+BF+BFC)]
[7.1.4 (TF+TR)]
[7.1.2 (TM)]
[7.1.2 (FD)]
[7.1.2 (FH)]
[7.1]
[5.1.4 (TF+TR)]
[5.1.2 (TM)]
[7.1]
[5.1.2 (TM)]
Advertisement
Chapters
Table of Contents
