Table of Contents
Advertisement
Misting Nozzle and Base
The misting nozzle and base is located and
fastened to the inside of the dryer on the rear
drum support.
The nozzle has a very fine mesh screen inside.
The screen is so fine that it will need replaced
instead of cleaned if it gets clogged.
Nozzle Replacement
To replace the nozzle, order Nozzle Replacement
Kit WE01X30097 and follow these instructions
carefully.
1. Using a 12-point socket or pliers, remove the
nozzle from the nozzle base.
2. Remove the screen mesh from inside the
nozzle base with a small flat-blade pocket
screw-driver.
– 29 –
(Continued next page)
Hide quick links:
Advertisement
Table of Contents
